RW Jump Suit designer

Product information

Our RW jump suits for beginners and experienced formation skydivers are made to measure and can be customised in the module system right through to competition suit.Only extremely durable nylon or 65/35 polycotton materials are used in the production. Our complex finishing techniques guarantee a long durability. 4-Thread safety-stitching on the inside, step-stitching and 3-stitch zigzag outside. Bar-stitching on all loading points. Good freedom of movement due to spandex fabric in the back area. All reinforcements and grips are made from hard wearing parapack. Basic version with outside arm and leg grips, one inside pocket. The suit is built according to the customer’s measurements and choice of colors. For the front side, there are 2 materials with different values of wind resistance to choose from. The choice of material can influence the rate of fall. Nylon suits have a smooth surface and therefore a faster rate of fall than polycotton suits.There are also 2 different styles of forearms to choose from: Tight fitting spandex arms, or looser fitting polycotton arms with a lot of material also regulate the fall rate. Tight fitting spandex forearms have a faster fall rate than polycotton ones.Three different fittings are offered; the choice also influencing the fall rate. Dependant on body size and mass, you can adapt yourself to your "playmates". We recommend tight fitting nylon suits for light ladies, loose polycotton suits for the large, heavy men, and extra wide fitting suits for the real heavyweights. Tight fitting suits have a faster fall rate than loose fitting suits!


from € 245 ex. VAT


High collar

Compared with the normal V-collar, the high collar is closed around the whole neck (up to the larynx).

Swoop cords

Swoop cords are hand loops, which enable the jumper to tension the generously dimensioned material in the upper body area like a wing – for heavy jumpers! Swoop cords are not an option on tight fitting suits.

Slip-on Arm sleeves

Slip-on Arm sleeves are polycotton sleeves to wear over spandex forearms and enable the jumper to choose between a faster or slower fall rate. They are attached to the arms at the elbows with press-studs.

Iside leg grips

Inside leg grips are attached to the inside leg at knee height and are a necessity for teams and competition formation skydiving.

Team grips

Team grips have a diameter of approx. 4 cm, standard grips have a diameter of approx. 3 cm. Thick grips have especially proven themselves in 4 and 8-way teamwork.

Soft grips

Soft grips have a more flexible filling and enable the competition jumper better grip and the best freedom of movement.

Two colored grips

Two colored grips are split lengthways and add a colorful contrast. Apiping can be centrally sewn in.

Seat reinforcements and knee reinforcements

Seat reinforcements and knee reinforcements are made of parapack and protect the suit from wear and tear when sitting and kneeing in the aircraft, during landing and packing.

Knee pads

Knee pads are made from a special foam and protect the delicate knee area when jumping, landing and packing – originally designed for tandem masters "working suits".

Wide leg with elastic band

This option is an extra long and wide leg cut designed to fall over the shoe similar to a freefly suit. It is an option very heavy jumpers like to use for extra wide jump suits instead of booties. Due to the high volume of material, the fall rate is reduced and more forward pressure is produced.

Leg zippers

Leg zippers allow you to open the suit at the lower leg on hot summer days. Putting on the jump suit while wearing sport shoes is only possible with wide cut suits.


Booties are fitted out with anti-skid synthetic soles and side zippers. They are worn over the shoes. Due to their large surface area and rudder-like effect, booties achieve the highest level of performance for turning and forward movement.


Rushorders are finished in half the normal delivery time.

DesignerWith the designer you can simply edit and order your combi from your screen.
Editable PDFYou can download an editable PDF for the product of your choice, and send it back to us by e-mail.
Classic PDFYou can download a classic PDF for the product of your choice, fill out the order form and send it back to us by fax or mail.
Dealersrainbow design is represented by a dealer at almost every larger airport in Germany. You can find your nearest dealer at our dealer page.